LED Connector

/LED Connector
    • This LED Strip Connector Suitable for 2 pin 8mm 3528 STANDARD WATERPROOF led lights(PU surface,not Silicone surface), One end for 2 core extension wire and another end for waterproof single color led strip
    • Connect led strip to wire: Can DIY custom wiring, without stripping wire, no soldering,Compatible with 20-18awg 2 conductor wire, solid wire or stranded wire, Use these with the 2 core extension wire to get lighting exactly where you want it
    • No need stripping waterproof coating of led strip before connection , easily connect your led strip to power, dimmer or controller without any soldering, just a pliers needed.
    • Firmly bite through the strip, don’t like traditional connector only conductive connection, it is a solid connection and much stronger
    • If your led strip are NON-WATERPROOF or NON-STANDARD WATERPROOF lights(too soft or too thin ), pls use this item AC-SE-N8XB-2
         
    • One end for RGB extension wire and another end for RGB Non-waterproof strip light. Connect to wire without stripping insulation (insulation-piercing-contact)
    • DIY RGB connector wire with length you want, no more worry distance from strip light to Controller or power supply
    • As much as 5A ( R,G,B 3 channel ) supported, allow you to connect longer LED strip by one connector.
    • Strip light end can work with 10mm wide SMD5050 rgb strip light non-waterproof (Below 96LEDs/Meter), wire end can work with 4 conductor wire ranging 22~20AWG/0.34~0.54 mm2
    • Clear cap design will allow light to go through, will not leave dark area at your lighting space.
       
  • led connector 8mm
    • This LED Strip Connector Suitable for 2 pin 8mm 3528 STANDARD WATERPROOF led lights(PU surface,not Silicone surface), One end for 2 core extension wire and another end for waterproof single color led strip
    • Connect led strip to wire: Can DIY custom wiring, without stripping wire, no soldering,Compatible with 20-18awg 2 conductor wire, solid wire or stranded wire, Use these with the 2 core extension wire to get lighting exactly where you want it
    • No need stripping waterproof coating of led strip before connection , easily connect your led strip to power, dimmer or controller without any soldering, just a pliers needed.
    • Firmly bite through the strip, don’t like traditional connector only conductive connection, it is a solid connection and much stronger
    • If your led strip are NON-WATERPROOF or NON-STANDARD WATERPROOF lights(too soft or too thin ), pls use this item AC-SE-N8XB-2
       
  • led connector 10mm 2pin
    • One end for strip light and another end for extension wire (22,20,and 18 AWG), easily DIY lead connector wire or strip-to-strip-bridge (jumper) with any length.No need stripping wire insulation before connection (pierce-to-contact), easily connect your led strip to power or dimmer without any soldering, just a pliers needed
    • Widely applicable for IP20 Non-waterproof tape light like 10mm SMD5050 /5630 /2835 /5730 in different LED density ranging 30~90 LEDs per meter
    • Clear Cap that will not mask light of first SMD thus hardly see dark area in your lighting space. Make lighting effect more uniform
    • Powerful with as much as total 5A current supported, allow you to connect longer LED strip by one connector,reducing cost and connection work
    • The pin will go through PCB from BACK of strip, which can grip strip light tightly and wire-end blade go through insulation to contact conductor inside cable, you never worry strip light or wire moving out of connector. Even workable to strip light with 3M VHB red foam adhesive tape
       
  • led connector 3pin
    • One end for strip light and another end for extension wire, DIY a lead connector wire with any length.Applicable for IP65/IP54 strip light (3 solder pad) in different LED density ranging 30~120 LEDs per meter.
    • No need stripping wire insulation nor waterproof coating of strip light before connection (pierce-to-contact) , easily connect your led strip to power, dimmer or controller without any soldering, just a pliers needed.
    • Clear Cap that will not mask light of first LED thus hardly see dark area in your lighting space. Make lighting effect more uniform.
    • Powerful with as much as total 5A current supported, allow you to connect longer LED strip by one connector,reducing cost and connection work.
    • With help of innovative inner-arc cap to fit strip light coating surface and piercing contact design, connector can grip strip light tightly,never worry strip light or wire moving out of connector. Even workable to strip light with 3M VHB red foam adhesive tape.
       
  • led connecotor 2pin
    • One end for strip light and another end for wire,easily DIY a lead connector wire with any length.Widly applicable for SMD5050 / SMD5630 / SMD2835 / SMD5730 strip light in different LED density ranging 30~90 LEDs per meter.Workable to strip light with 3M VHB red adhesive tape.
    • Clear Cap that will not mask light of first LED. Will not leave dark area in your lighting space, making your lighting effect uniform
    • As much as 5A current supported, allow you to connect longer LED strip by one connector.
    • No need stripping wire insulation before connection (pierce-to-contact), really allow user to insert & press to connect with a 'CLICK'sound. Connect your led strip to power or dimmer without any soldering, just a pliers needed.
    • Innovative fixing bar and piercing contact design will grip strip light tightly,never worry strip light or wire moving out of connector.
     
  • led connector 3pin
    • One end for strip light and another end for extension wire, DIY a lead connector wire with any length.Applicable for IP20 strip light (3 solder pad) in different LED density ranging 30~120 LEDs per meter.
    • No need stripping wire insulation before connection (pierce-to-contact) , easily connect your led strip to cable, power, dimmer or controller without any soldering.
    • Clear Cap that will not mask light of first LED thus hardly see dark area in your lighting space. Make lighting effect more uniform.
    • Powerful with as much as total 5A current supported, allow you to connect longer LED strip by one connector,reducing cost and connection work.
    • With fixing bar on cap and piercing contact design, connector can grip strip light tightly,never worry strip light or wire moving out of connector. Even workable to strip light with 3M VHB red foam adhesive tape.
       
    • This LED Strip Connector suitable for 4 pin 10mm 5050 waterproof LED strip lights(PU surface,not Silicone surface), One end connect 4-conductor flat RGB extension wire and another end for rgb led strip
    • Connects directly to 4pin 10 mm PCB board(No need stripping glue coating on PCB). Compatible with both 12v and 24v 5050 rgb led strip, addressable led light strip ws2813(upgraded ws2812b led strip)
    • RGB Strip to Wire Connector connect wire with length you want, without stripping wire. Compatible with 20-18awg 4 conductor wire, solid wire or stranded wire, Use these with the 4 core extension wire to get lighting exactly where you want it
    • Firmly bite through the led light strips, don’t like old style led strip connectors only conductive connection, it is a solid connection and much stronger
    • If your led strips are NON-WATERPROOF or NON-STANDARD WATERPROOF lights(too soft or too thin ), pls refer to this item (ASIN:B01MU7FKUK)
       
  • RGBW LED Connector 5 Pin for 12mm Non-Waterproof LED Strip Lights RGBW LED Connector 5 Pin for 12mm Non-Waterproof LED Strip Lights
    • One end for RGBW extension wire and another end for RGBW Non-waterproof strip light. Connect to wire without stripping insulation (insulation-piercing-contact)
    • DIY RGBW connector wire with length you want, no more worry distance from strip light to Controller or power supply
    • As much as 5A ( R,G,B,W 4 channel ) supported, allow you to connect longer LED strip by one connector
    • Strip light end can work with 12mm wide SMD5050 rgbw (4 in 1) / RGB+White strip light non-waterproof (Below 90LEDs/Meter), wire end can work with 5 conductor wire ranging 22~20AWG/0.34~0.54 mm²
    • Clear cap design will allow light to go through, will not leave dark area at your lighting space
     
    • This LED Strip Connector Suitable for 2 pin 5mm 3528 STANDARD NON-WATERPROOF led lights(PU surface,not Silicone surface), One end for 2 core extension wire and another end for waterproof single color led strip
    • Connect led strip to wire: Can DIY custom wiring, without stripping wire, no soldering,Compatible with 20-18awg 2 conductor wire, solid wire or stranded wire, Use these with the 2 core extension wire to get lighting exactly where you want it
    • No need stripping waterproof coating of led strip before connection , easily connect your led strip to power, dimmer or controller without any soldering, just a pliers needed.
    • Firmly bite through the strip, don’t like traditional connector only conductive connection, it is a solid connection and much stronger
    • If your led strip are NON-WATERPROOF or NON-STANDARD WATERPROOF lights(too soft or too thin ), pls use this item AC-SE-N5XB-2
     
  • Alightings-100pcs-Mounting-Brackets-Clip-for-LED-Strip-Light-One-Side-Fixing-100pcs-Screws-Included-0.42inch-Hollow-Distance-Ideal-for-10mm-Wide-PCB-50505630-SMD-LED-Non-waterproof-Strips Alightings-100pcs-Mounting-Brackets-Clip-for-LED-Strip-Light-One-Side-Fixing-100pcs-Screws-Included-0.42inch-Hollow-Distance-Ideal-for-10mm-Wide-PCB-50505630-SMD-LED-Non-waterproof-Strips
    • 0.42inch hollow distance, 0.04inch hollow height, ideal for 2835/3528/5050/5630/3014 SMD LED non-waterproof strip light within 10mm (0.39inch)width, 3pcs are enough for 1 meter
    • Ultra-thin appearance design, which can hold the lighting effect of the strip light completely and no damage on brightness
    • Easy to fix by one screw for each clip, take down the LED strip light from the other end freely when replace or maintain it
    • They were designed for screwing into wood materials such as cabinet, Wardrobe,bookcase
    • 100pcs of mounting bracket clips and 100pcs screws included, easy to fix by one screw for each clip, keep the LED strip secure
  • 6pin led light strip connectors rgbww connector 6pin led light strip connectors for 12mm rgb+cct led strip lights
    • 12mm 6 pin connectors suitable for SMD 5050 2835 3014 5630 rgb+cct LED light strips. One end connect 6-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
    • The 5050 connector can penetrate 6pin 12 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
    • DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 6 conductor wire, solid wire or stranded wire, Use these 6-pin connector with the 6 core extension cable to get lighting exactly where you want it.
    • The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.