One end for RGBW extension wire and another end for RGBW Non-waterproof strip light. Connect to wire without stripping insulation (insulation-piercing-contact)
DIY RGBW connector wire with length you want, no more worry distance from strip light to Controller or power supply
As much as 5A ( R,G,B,W 4 channel ) supported, allow you to connect longer LED strip by one connector
Strip light end can work with 12mm wide SMD5050 rgbw (4 in 1) / RGB+White strip light non-waterproof (Below 90LEDs/Meter), wire end can work with 5 conductor wire ranging 22~20AWG/0.34~0.54 mm²
Clear cap design will allow light to go through, will not leave dark area at your lighting space
12mm 6 pin connectors suitable for SMD 5050 2835 3014 5630 rgb+cct LED light strips. One end connect 6-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
The 5050 connector can penetrate 6pin 12 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 6 conductor wire, solid wire or stranded wire, Use these 6-pin connector with the 6 core extension cable to get lighting exactly where you want it.
The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
0.42inch hollow distance, 0.04inch hollow height, ideal for 2835/3528/5050/5630/3014 SMD LED non-waterproof strip light within 10mm (0.39inch)width, 3pcs are enough for 1 meter
Ultra-thin appearance design, which can hold the lighting effect of the strip light completely and no damage on brightness
Easy to fix by one screw for each clip, take down the LED strip light from the other end freely when replace or maintain it
They were designed for screwing into wood materials such as cabinet, Wardrobe,bookcase
100pcs of mounting bracket clips and 100pcs screws included, easy to fix by one screw for each clip, keep the LED strip secure
0.42inch hollow distance, 0.04inch hollow height, ideal for 2835/3528/5050/5630/3014 SMD LED non-waterproof strip light within 10mm (0.39inch)width, 3pcs are enough for 1 meter
Ultra-thin appearance design, which can hold the lighting effect of the strip light completely and no damage on brightness
Easy to fix by one screw for each clip, take down the LED strip light from the other end freely when replace or maintain it
They were designed for screwing into wood materials such as cabinet, Wardrobe,bookcase
100pcs of mounting bracket clips and 100pcs screws included, easy to fix by one screw for each clip, keep the LED strip secure
12mm 6 pin connectors suitable for SMD 5050 2835 3014 5630 rgb+cct LED light strips. One end connect 6-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
The 5050 connector can penetrate 6pin 12 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 6 conductor wire, solid wire or stranded wire, Use these 6-pin connector with the 6 core extension cable to get lighting exactly where you want it.
The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
12mm 6 pin connectors suitable for SMD 5050 rgbww LED light strips. One end connect 6-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
The 5050 rgb cct connector can penetrate 6pin 12 mm PCB board and 22 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 22 gauge 6 conductor wire, solid wire or stranded wire, Use these 6-pin connector with the 6 core extension cable to get lighting exactly where you want it.
The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
12mm 5 pin connectors suitable for SMD 5050 rgbw LED light strips. One end connect 5-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
The 5050 rgbw connector can penetrate 5pin 12 mm PCB board and 22 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 22 gauge 5 conductor wire, solid wire or stranded wire, Use these 5-pin connector with the 5 core extension cable to get lighting exactly where you want it.
The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
10mm 5 pin connectors suitable for SMD 5050 rgbw LED light strips. One end connect 4-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 12mm led strips, rgb led strip, or non-standard 22awg wire.
The 5050 rgbw connector can penetrate 5pin 10 mm PCB board and 22 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 22 gauge 5 conductor wire, solid wire or stranded wire, Use these 5-pin connector with the 5 core extension cable to get lighting exactly where you want it.
The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
12mm 5 pin connectors suitable for SMD 5050 2835 3014 5630 rgbw LED light strips. One end connect 5-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
The 5050 connector can penetrate 5pin 12 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 5 conductor wire, solid wire or stranded wire, Use these 5-pin connector with the 5 core extension cable to get lighting exactly where you want it.
The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
This LED Strip Connector suitable for 4 pin 10mm 5050 waterproof LED strip lights(PU surface,not Silicone surface), One end connect 4-conductor flat RGB extension wire and another end for rgb led strip
Connects directly to 4pin 10 mm PCB board(No need stripping glue coating on PCB). Compatible with both 12v and 24v 5050 rgb led strip, addressable led light strip ws2813(upgraded ws2812b led strip)
RGB Strip to Wire Connector connect wire with length you want, without stripping wire. Compatible with 20-18awg 4 conductor wire, solid wire or stranded wire, Use these with the 4 core extension wire to get lighting exactly where you want it
Firmly bite through the led light strips, don’t like old style led strip connectors only conductive connection, it is a solid connection and much stronger
If your led strips are NON-WATERPROOF or NON-STANDARD WATERPROOF lights(too soft or too thin ), pls refer to this item (ASIN:B01MU7FKUK)
One end for RGB extension wire and another end for RGB Non-waterproof strip light. Connect to wire without stripping insulation (insulation-piercing-contact)
DIY RGB connector wire with length you want, no more worry distance from strip light to Controller or power supply
As much as 5A ( R,G,B 3 channel ) supported, allow you to connect longer LED strip by one connector.
Strip light end can work with 10mm wide SMD5050 rgb strip light non-waterproof (Below 96LEDs/Meter), wire end can work with 4 conductor wire ranging 22~20AWG/0.34~0.54 mm2
Clear cap design will allow light to go through, will not leave dark area at your lighting space.
