- 0.42inch hollow distance, 0.04inch hollow height, ideal for 2835/3528/5050/5630/3014 SMD LED non-waterproof strip light within 10mm (0.39inch)width, 3pcs are enough for 1 meter
- Ultra-thin appearance design, which can hold the lighting effect of the strip light completely and no damage on brightness
- Easy to fix by one screw for each clip, take down the LED strip light from the other end freely when replace or maintain it
- They were designed for screwing into wood materials such as cabinet, Wardrobe,bookcase
- 100pcs of mounting bracket clips and 100pcs screws included, easy to fix by one screw for each clip, keep the LED strip secure
Alightings 100pcs LED Strip Mounting Bracket Clips for 10mm Wide PCB 5050 SMD Non-waterproof LED Light Strip, 100pcs Screws Included
Name: 100pcs led strip clips
These led clip are mounting brackets clips which suitable for NON-WATERPROOF light strips , to fix by one screw for each clip, don’t affect the lamp brightness.
Ideal for Waterproof Strip Width 10mm
The bracket has 0.42inch hollow distance and 0.04inch hollow height. It is ideal fixture to mount the SMD5050 LED waterproof strip light within 10 mm width.
Ultra-thin appearance design
This mounting brackets has an ultra-thin appearance design, which made it can hold the lighting effect of the strip light completely and no damage on brightness.
Upgraded installation process
The upgraded installation process made it easy to fix by one screw for each clip. You can take it down from the other end side freely when you want to replace or maintain the LED strip lights
Hollow distance: 0.42inch
Hollow height: 0.04inch
Material: plastic nylon 66, UL 94V-0
Use and installation:
1.When you receive the LED strip clips, Please check out whether the sizes of the clips are compatible with your LED light strip or not.
2. Shut down the power before installing the clips.
3. Rip off the 3M paper on the adhesive tape behind the strip light, then choose an proper place for installing the strip light.
4. Plan the mounting holes and make the markings, suggested using 3 – 6 pieces clips within 1 meter long strip lights.
5. Due to the very small clips, suggested firstly putting screws through the clips and then fixed the screw in the marked mounting holes(Pls be careful not to tighten it completely).
6. Adjust these led clips so that they can coincide with the strip surface, and then continue to tighten the screw until the clip completely clamp light strip.
7. After complete the installation, please check whether all are in place
100 pcs led strip clips
100 pcs screws
There are no reviews yet.